Shopping cart

Your cart is currently empty

Product image slideshow Items

  • COLORAMICS, LLC MAYCO PC-602 WHITE CASCADE
  • COLORAMICS, LLC MAYCO PC-602 WHITE CASCADE

MAYCO PC-602 WHITE CASCADE

Article number: PC602P
$18.95
Incl. tax

Cone 06 oxidation: PC-602 White Cascade intermingles with the other glazes being used, introducing pure white to the colors you are using, blending with the color.
Cone 6 oxidation: Transparent. Color clear with white float.

In stock
swap-horizontal Add to compare

TIP: Chip shown over EL-118 Blue Grotto. PC-602 White Cascade has a minimum movement and will stay in the pattern that you apply it in.

Pottery Cascade™ are moving, flowing glazes, commonly used under or over other glazes to create reactions and movement. Pottery Cascade™ are commonly used by low-fire designers who seek to simulate effects of higher fire glazes. May be applied randomly or uniformly, brushed or dabbed on with a sponge. Their variability insures that no two designs will be exactly alike.

General Use

Apply 1-2 coats with a brush or sponge, under or over another glaze. You can influence the direction of the flow or create a pattern by how you apply the glazes. Allow to dry thoroughly. Fire to cones 06/05. To prevent the glaze from running off your vertical pieces do not apply Pottery Cascades to the bottom third of the piece. Vertical pieces require more attention to this detail than horizontal pieces.

Pottery Cascades® are AP Non-Toxic, Food Safe and Dinnerware Safe when used according to manufacturer’s directions

  • Avoid applying Pottery Cascade™ on lower third of a piece, as glaze will move.
  • PC-601 Clear Cascade is the most fluid of the Cascade products, requiring care in application.
  • PC-602 White Cascade moves less than Clear Cascade.
  • Pottery Cascade™ are luster compatible.
  • We advise against dipping your brush directly into the jar to avoid contamination, particularly if you are using one brush to layer Pottery Cascades over other glazes.
  • Pottery Cascade™ glazes were designed to mature at a shelf cone 06. Make sure the glaze has dried thoroughly prior to firing. A medium ramp/firing rate is recommended (250F per hour).
Learn more about Mayco Pottery Cascade Glazes: https://www.maycocolors.com/color/fired/pottery-cascade/
CASCADE / LOW FIRE / white