TW Twig Hand Rollers are 3 inches (7.5 cm) long and 0.4 inches (1 cm) in diameter. You simply roll the TW roller with your hand across the clay or up the wall of a pot to create a beautiful pattern in any clay.

Sss Stamps are 1.5 x 1.5 cm (0.6 x 0.6 inch) square. Sss stamp can be used to create beautiful patterns on any soft medium, including natural clays, porcelain, polymer clays, cookie dough, and fondant.

Use this 10” tool to transfer measurements from the model to the clay and measure thickness and diameters.

The Kemper HC1 Round Hole Cutter makes a 3/16” hole. Made from sharpened polished brass set in a smooth hardwood handles. These ceramic tools can easily make clean holes in wet thick-wall greenware and heavy clay.

One custom silkscreened underglaze rice paper transfer sheet for use on greenware or bisque pottery.

One custom silkscreened underglaze rice paper transfer sheet for use on greenware or bisque pottery.

Orton’s patented Self-Supporting Cones are the most accurate and easy to use witness cones available. Since the correct height and angle are built into the cone, reproducible firings can be achieved time after time.

Small Cones are commonly used in the Kiln-Sitter—they are not used as witness cones. The tapered shape allows some flexibility to adjust shut-off by placing the thinner or thicker portion of the cone under the sensing rod.

Small Cones are commonly used in the Kiln-Sitter—they are not used as witness cones. The tapered shape allows some flexibility to adjust shut-off by placing the thinner or thicker portion of the cone under the sensing rod.

The D Series are all-purpose Roselli stilts that are linear in shape and available in many sizes. They can be fired multiple times and withstand rugged treatment.

SSL12 - Regular edge (12 teeth per inch)

For when you really want to sink your teeth into your clay, grab all three large FANGS as a set! Everyone’s clay is different--some are fine, some are gritty. The FANG series of scoring tools allow you to find the right tooth size for your clay!

If you are going to buy a tool for shaping your clay, play dirty with this multi-purpose rib.

The T6 pottery tool is a classic shape that provides stable straight edges as well as a curve. The 90° corner allows you to create solid clay cylinders and provides support for walls over 8 inches tall. T6 is the taller of our T tools.

Modeled after a cone pack complete with cones 5/6/7 with the middle cone fallen. These cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.

Dirty Girls Ergonomic Cutoff Wire 9" Ergonomic Wiggle Wire

Self Adhesive Foam: Made for Bat. Used for Trimming. The foam bat sticks firmly to all types of 14 wood and plastic bats.