TIP: SW-108 Green Tea is the base glaze. For a lighter crystal effect, you may try applying two coats of SW-108 Green Tea with a third coat of SW-146 Aurora Green. Due to the large sized crystals in Aurora Green they often reside in the bottom of the glaze; be sure to stir well or pour the glaze out onto a plate to make them more accessible.

Stoneware crystal glazes are designed to expand upon the surface with dazzling burts of color. Fired results will vary based on ware’s orientation. Crystals will settle to the bottom of the jar and will need a good mixing prior to initial use. Re-stir between each coat. Stir with palette knife or other unpainted tool. Avoid placing crystals near the bottom third of a vertical piece as they may cause additional movement during firing. Crystals will flow more than the base glaze. While the glaze is wet, use your fan brush to redistribute the crystals to achieve balanced coverage. Over-application or heavy deposition of the crystals can cause pinholing or running. When storing a crystal glaze, you may consider storing upside down to facilitate crystal dispersion on the next use.

Mayco’s line of Stoneware Glazes are available in a beautiful array of colors, tints and tones. These glazes were developed to perform from mid-range (cone 5/6) to higher fire (cone 9/10) temperatures.  Stoneware classic glazes offer the depth, sophistication and reliability to artists working from mid-range to high-fire temperatures. Many glazes will break over textures, revealing secondary colors and shades. Used alone, stoneware glazes produce beautiful color variations. One coat will allow the clay body to show through the glaze and two to three coats deeper the color. The choice of clay body, thickness of glaze application, firing process and temperature will affect the fired finish--we recommend that glazes always be tested on your clay body.  

Mayco’s Stoneware Glazes are Food Safe, Non Toxic and Non Hazardous when used according to manufacturer's directions.